Bowers & Wilkins 603 S3-OAK vs KLH Audio MODEL THREE-ENGLISH-WALNUT
Prices updated hourly. Check retailer for current availability.
Choosing between the Bowers & Wilkins 603 S3-OAK and KLH Audio MODEL THREE-ENGLISH-WALNUT? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Bowers & Wilkins 603 S3-OAK scores higher in audio quality, volume/SPL. The KLH Audio MODEL THREE-ENGLISH-WALNUT leads in value, form factor, room fit.
For speaker performance, the Bowers & Wilkins 603 S3-OAK is more sensitive at 90 dB vs 85 dB, and impedances of 8Ω vs 6Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
For most home theaters, the KLH Audio MODEL THREE-ENGLISH-WALNUT is the stronger choice — it leads in 3 of 5 scored dimensions. The Bowers & Wilkins 603 S3-OAK makes more sense if you prioritize the 2 dimensions where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Bowers & Wilkins 603 S3-OAK
KLH Audio MODEL THREE-ENGLISH-WALNUT
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 3-way | 2-way |
| Sensitivity | 90dB | 85dB |
| Impedance | 8Ω | 6Ω |
| Freq Response Low | 29Hz | 46Hz |
| Freq Response High | 33000Hz | 20000Hz |
| Crossover | — | 1500Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 30W | 10W |
| Rec. Power Max | 150W | 150W |
| Mounting Type | tower | bookshelf |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Rec. Power Min: Bowers & Wilkins 603 S3-OAK at 30W vs KLH Audio MODEL THREE-ENGLISH-WALNUT at 10W
- Freq Response High: Bowers & Wilkins 603 S3-OAK at 33000Hz vs KLH Audio MODEL THREE-ENGLISH-WALNUT at 20000Hz
- Freq Response Low: Bowers & Wilkins 603 S3-OAK at 29Hz vs KLH Audio MODEL THREE-ENGLISH-WALNUT at 46Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Driver Config: Bowers & Wilkins 603 S3-OAK at 3-way vs KLH Audio MODEL THREE-ENGLISH-WALNUT at 2-way. 3-way speakers use dedicated drivers for bass, midrange, and treble, reducing crossover interference. Coaxial designs (KEF Uni-Q) mount the tweeter inside the woofer for better time-alignment.
- Impedance: Bowers & Wilkins 603 S3-OAK at 8Ω vs KLH Audio MODEL THREE-ENGLISH-WALNUT at 6Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
Which Should You Choose?
Choose Bowers & Wilkins 603 S3-OAK if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Bowers & Wilkins 603 S3-OAK and KLH Audio MODEL THREE-ENGLISH-WALNUT compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.

