Klipsch S-1 vs Wharfedale D300-3D-SURROUND
Prices updated hourly. Check retailer for current availability.
Choosing between the Klipsch S-1 and Wharfedale D300-3D-SURROUND? Both compete in the Speaker (Surround) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Klipsch S-1 scores higher in audio quality, volume/SPL, form factor, room fit. The Wharfedale D300-3D-SURROUND leads in value.
For speaker performance, the Klipsch S-1 is more sensitive at 88.5 dB vs 88 dB, and impedances of 8Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The Klipsch S-1 holds an advantage across more performance dimensions, but the Wharfedale D300-3D-SURROUND may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the Klipsch S-1 is the stronger choice — it leads in 4 of 5 scored dimensions. The Wharfedale D300-3D-SURROUND makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Klipsch S-1
Wharfedale D300-3D-SURROUND
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way |
| Sensitivity | 88.5dB | 88dB |
| Impedance | 8Ω | 4Ω |
| Freq Response Low | 95Hz | 100Hz |
| Freq Response High | 23000Hz | 20000Hz |
| Crossover | 2800Hz | 1600Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | — | 20W |
| Rec. Power Max | — | 60W |
| Mounting Type | surround | surround |
| Atmos Upfiring Module | No | No |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Impedance: Klipsch S-1 at 8Ω vs Wharfedale D300-3D-SURROUND at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Crossover: Klipsch S-1 at 2800Hz vs Wharfedale D300-3D-SURROUND at 1600Hz
- Freq Response High: Klipsch S-1 at 23000Hz vs Wharfedale D300-3D-SURROUND at 20000Hz
- Freq Response Low: Klipsch S-1 at 95Hz vs Wharfedale D300-3D-SURROUND at 100Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Sensitivity: Klipsch S-1 at 88.5dB vs Wharfedale D300-3D-SURROUND at 88dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
Which Should You Choose?
Choose Klipsch S-1 if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Klipsch S-1 and Wharfedale D300-3D-SURROUND compare to the rest of the field.
Best Speaker (Surround) RankingsSpecifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
Klipsch S-1
vs Fluance ELITE-HIGH-DEFINITION-COMPACT-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
Wharfedale D300-3D-SURROUND
vs Fluance ELITE-HIGH-DEFINITION-COMPACT-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
Klipsch S-1
vs Fluance REFERENCE-HIGH-PERFORMANCE-2-WAY-BOOKSHELF-AND-SURROUND-SPEAKERS
Wharfedale D300-3D-SURROUND
vs Fluance REFERENCE-HIGH-PERFORMANCE-2-WAY-BOOKSHELF-AND-SURROUND-SPEAKERS
Klipsch S-1
vs Fluance ELITE-HIGH-DEFINITION-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
Wharfedale D300-3D-SURROUND
vs Fluance ELITE-HIGH-DEFINITION-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.