Klipsch CDT-2650-SC vs Miller & Kreisel S300T
Prices updated hourly. Check retailer for current availability.
Choosing between the Klipsch CDT-2650-SC and Miller & Kreisel S300T? Both compete in the Speaker (Surround) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Klipsch CDT-2650-SC scores higher in form factor, room fit. The Miller & Kreisel S300T leads in value, audio quality, volume/SPL.
For speaker performance, the Klipsch CDT-2650-SC is more sensitive at 92 dB vs 89 dB, and impedances of 8Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (Surround) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
For most home theaters, the Miller & Kreisel S300T is the stronger choice — it leads in 3 of 5 scored dimensions. The Klipsch CDT-2650-SC makes more sense if you prioritize the 2 dimensions where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Klipsch CDT-2650-SC
Miller & Kreisel S300T
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way |
| Sensitivity | 92dB | 89dB |
| Impedance | 8Ω | 4Ω |
| Freq Response Low | 77Hz | 80Hz |
| Freq Response High | 20000Hz | 22000Hz |
| Crossover | 2280Hz | — |
| Bi-Amp Capable | No | No |
| Rec. Power Min | — | 25W |
| Rec. Power Max | — | 400W |
| Mounting Type | surround | surround |
| Atmos Upfiring Module | No | No |
| Mounting Depth | 4.5" | — |
| Cutout Diameter | 9.5" | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | 12AWG | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Impedance: Klipsch CDT-2650-SC at 8Ω vs Miller & Kreisel S300T at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response High: Klipsch CDT-2650-SC at 20000Hz vs Miller & Kreisel S300T at 22000Hz
- Freq Response Low: Klipsch CDT-2650-SC at 77Hz vs Miller & Kreisel S300T at 80Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Sensitivity: Klipsch CDT-2650-SC at 92dB vs Miller & Kreisel S300T at 89dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
- Crossover: Klipsch CDT-2650-SC at 2280Hz vs Miller & Kreisel S300T at —
Which Should You Choose?
Choose Klipsch CDT-2650-SC if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Klipsch CDT-2650-SC and Miller & Kreisel S300T compare to the rest of the field.
Best Speaker (Surround) RankingsSpecifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
Klipsch CDT-2650-SC
vs Fluance REFERENCE-HIGH-PERFORMANCE-2-WAY-BOOKSHELF-AND-SURROUND-SPEAKERS
Miller & Kreisel S300T
vs Fluance REFERENCE-HIGH-PERFORMANCE-2-WAY-BOOKSHELF-AND-SURROUND-SPEAKERS
Klipsch CDT-2650-SC
vs Fluance ELITE-HIGH-DEFINITION-COMPACT-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
Miller & Kreisel S300T
vs Fluance ELITE-HIGH-DEFINITION-COMPACT-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
Klipsch CDT-2650-SC
vs Fluance ELITE-HIGH-DEFINITION-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
Miller & Kreisel S300T
vs Fluance ELITE-HIGH-DEFINITION-SURROUND-SOUND-HOME-THEATER-5.1-CHANNEL-SPEAKER-SYSTEM
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.