Polk Audio RESERVE R300-BROWN vs Wharfedale DIAMOND 12.CI-ALL-BLACK
Prices updated hourly. Check retailer for current availability.
Choosing between the Polk Audio RESERVE R300-BROWN and Wharfedale DIAMOND 12.CI-ALL-BLACK? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Polk Audio RESERVE R300-BROWN scores higher in audio quality, volume/SPL, form factor, room fit. They score similarly in value.
For speaker performance, the Wharfedale DIAMOND 12.CI-ALL-BLACK is more sensitive at 90 dB vs 86.5 dB, and impedances of 3.8Ω vs 8Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The Polk Audio RESERVE R300-BROWN holds an advantage across more performance dimensions, but the Wharfedale DIAMOND 12.CI-ALL-BLACK may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the Polk Audio RESERVE R300-BROWN is the stronger choice — it leads in 4 of 5 scored dimensions. The Wharfedale DIAMOND 12.CI-ALL-BLACK makes more sense if budget is the primary constraint.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Polk Audio RESERVE R300-BROWN
Wharfedale DIAMOND 12.CI-ALL-BLACK
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | Sealed | 2-way |
| Sensitivity | 86.5dB | 90dB |
| Impedance | 3.8Ω | 8Ω |
| Freq Response Low | 45Hz | 90Hz |
| Freq Response High | 50000Hz | 20000Hz |
| Crossover | 2200Hz | 2200Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 30W | 20W |
| Rec. Power Max | 200W | 120W |
| Mounting Type | center | center |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Freq Response High: Polk Audio RESERVE R300-BROWN at 50000Hz vs Wharfedale DIAMOND 12.CI-ALL-BLACK at 20000Hz
- Impedance: Polk Audio RESERVE R300-BROWN at 3.8Ω vs Wharfedale DIAMOND 12.CI-ALL-BLACK at 8Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response Low: Polk Audio RESERVE R300-BROWN at 45Hz vs Wharfedale DIAMOND 12.CI-ALL-BLACK at 90Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Rec. Power Max: Polk Audio RESERVE R300-BROWN at 200W vs Wharfedale DIAMOND 12.CI-ALL-BLACK at 120W
- Rec. Power Min: Polk Audio RESERVE R300-BROWN at 30W vs Wharfedale DIAMOND 12.CI-ALL-BLACK at 20W
Which Should You Choose?
Choose Polk Audio RESERVE R300-BROWN if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
Choose Wharfedale DIAMOND 12.CI-ALL-BLACK if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
See Where These Rank
Check our editorial rankings to see how Polk Audio RESERVE R300-BROWN and Wharfedale DIAMOND 12.CI-ALL-BLACK compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.

