Polk Audio 107RC60I vs Yamaha 022AW592BL
Prices updated hourly. Check retailer for current availability.
Choosing between the Polk Audio 107RC60I and Yamaha 022AW592BL? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Polk Audio 107RC60I scores higher in value. The Yamaha 022AW592BL leads in audio quality, volume/SPL, form factor, room fit.
For speaker performance, the Polk Audio 107RC60I is more sensitive at 89 dB vs 88 dB, and impedances of 8Ω vs 6Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The Yamaha 022AW592BL holds an advantage across more performance dimensions, but the Polk Audio 107RC60I may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the Yamaha 022AW592BL is the stronger choice — it leads in 4 of 5 scored dimensions. The Polk Audio 107RC60I makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Polk Audio 107RC60I
Yamaha 022AW592BL
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way |
| Sensitivity | 89dB | 88dB |
| Impedance | 8Ω | 6Ω |
| Freq Response Low | 40Hz | 55Hz |
| Freq Response High | 20000Hz | 20000Hz |
| Crossover | — | 5000Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 20W | 50W |
| Rec. Power Max | 100W | 150W |
| Mounting Type | in-ceiling | outdoor |
| Mounting Depth | 2.875" | — |
| Cutout Diameter | 7.5625" | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | Yes | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | spring clips | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Rec. Power Min: Polk Audio 107RC60I at 20W vs Yamaha 022AW592BL at 50W
- Rec. Power Max: Polk Audio 107RC60I at 100W vs Yamaha 022AW592BL at 150W
- Freq Response Low: Polk Audio 107RC60I at 40Hz vs Yamaha 022AW592BL at 55Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Impedance: Polk Audio 107RC60I at 8Ω vs Yamaha 022AW592BL at 6Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Sensitivity: Polk Audio 107RC60I at 89dB vs Yamaha 022AW592BL at 88dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
Which Should You Choose?
Choose Polk Audio 107RC60I if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Polk Audio 107RC60I and Yamaha 022AW592BL compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
Polk Audio 107RC60I
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
Yamaha 022AW592BL
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
Polk Audio 107RC60I
vs Bowers & Wilkins 603 S3-OAK
Yamaha 022AW592BL
vs Bowers & Wilkins 603 S3-OAK
Polk Audio 107RC60I
vs Focal THEVA CENTER-LIGHT-WOOD
Yamaha 022AW592BL
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.