Polk Audio 107255CRT vs Revel 265W763
Prices updated hourly. Check retailer for current availability.
Choosing between the Polk Audio 107255CRT and Revel 265W763? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Polk Audio 107255CRT scores higher in audio quality, volume/SPL. The Revel 265W763 leads in form factor, room fit. They score similarly in value.
Speaker performance depends on room acoustics, placement, and amplifier pairing. The specs below provide a starting point, but audition both in your space when possible.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
These two are closely matched — your decision comes down to your specific room setup and speaker pairing and budget.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | — | 2-way |
| Sensitivity | 90dB | — |
| Impedance | 8Ω | 8Ω |
| Freq Response Low | — | — |
| Freq Response High | — | — |
| Crossover | — | — |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 10W | 10W |
| Rec. Power Max | — | 140W |
| Mounting Type | in-wall | in-wall |
| Mounting Depth | — | 3.75" |
| Cutout Diameter | — | — |
| Cutout Width | — | 7.5625" |
| Cutout Height | — | 9.8125" |
| Wall Thickness Min | — | 0.5" |
| Wall Thickness Max | — | 1" |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | Yes |
| Magnetic Grille | No | Yes |
| Grille Shape | — | — |
| Connector Type | — | spring-post terminals (bare wire up to 10AWG, single/dual banana plugs) |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Driver Config: Polk Audio 107255CRT at — vs Revel 265W763 at 2-way. 3-way speakers use dedicated drivers for bass, midrange, and treble, reducing crossover interference. Coaxial designs (KEF Uni-Q) mount the tweeter inside the woofer for better time-alignment.
- Sensitivity: Polk Audio 107255CRT at 90dB vs Revel 265W763 at —. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
- Rec. Power Max: Polk Audio 107255CRT at — vs Revel 265W763 at 140W
- Mounting Depth: Polk Audio 107255CRT at — vs Revel 265W763 at 3.75"
- Cutout Width: Polk Audio 107255CRT at — vs Revel 265W763 at 7.5625"
See Where These Rank
Check our editorial rankings to see how Polk Audio 107255CRT and Revel 265W763 compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more

