Perlisten A3T vs Wet Sounds 867VSMC65
Prices updated hourly. Check retailer for current availability.
Choosing between the Perlisten A3T and Wet Sounds 867VSMC65? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Perlisten A3T scores higher in audio quality, volume/SPL. The Wet Sounds 867VSMC65 leads in form factor, room fit. They score similarly in value.
For speaker performance, the Wet Sounds 867VSMC65 is more sensitive at 88 dB vs 87.7 dB, and impedances of 4Ω vs 8Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
These two are closely matched — your decision comes down to your specific room setup and speaker pairing and budget.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way bass reflex | — |
| Sensitivity | 87.7dB | 88dB |
| Impedance | 4Ω | 8Ω |
| Freq Response Low | 31Hz | 55Hz |
| Freq Response High | 27000Hz | 20000Hz |
| Crossover | — | — |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 50W | — |
| Rec. Power Max | 300W | — |
| Mounting Type | tower | in-ceiling |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Impedance: Perlisten A3T at 4Ω vs Wet Sounds 867VSMC65 at 8Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response Low: Perlisten A3T at 31Hz vs Wet Sounds 867VSMC65 at 55Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Freq Response High: Perlisten A3T at 27000Hz vs Wet Sounds 867VSMC65 at 20000Hz
- Sensitivity: Perlisten A3T at 87.7dB vs Wet Sounds 867VSMC65 at 88dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
- Driver Config: Perlisten A3T at 2-way bass reflex vs Wet Sounds 867VSMC65 at —. 3-way speakers use dedicated drivers for bass, midrange, and treble, reducing crossover interference. Coaxial designs (KEF Uni-Q) mount the tweeter inside the woofer for better time-alignment.
Which Should You Choose?
Choose Perlisten A3T if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
Choose Wet Sounds 867VSMC65 if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
See Where These Rank
Check our editorial rankings to see how Perlisten A3T and Wet Sounds 867VSMC65 compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
Perlisten A3T
vs Bowers & Wilkins 603 S3-OAK
Wet Sounds 867VSMC65
vs Bowers & Wilkins 603 S3-OAK
Perlisten A3T
vs Bowers & Wilkins HTM71 S3-MOCHA
Wet Sounds 867VSMC65
vs Bowers & Wilkins HTM71 S3-MOCHA
Perlisten A3T
vs Focal THEVA CENTER-LIGHT-WOOD
Wet Sounds 867VSMC65
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more