Klipsch Reference Premiere RP-6000F II-EBONY vs Wet Sounds 867V8PROB
Prices updated hourly. Check retailer for current availability.
Choosing between the Klipsch Reference Premiere RP-6000F II-EBONY and Wet Sounds 867V8PROB? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Klipsch Reference Premiere RP-6000F II-EBONY scores higher in value. The Wet Sounds 867V8PROB leads in audio quality, volume/SPL, form factor, room fit.
For speaker performance, the Klipsch Reference Premiere RP-6000F II-EBONY is more sensitive at 96 dB vs 92 dB, and impedances of 8Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The Wet Sounds 867V8PROB holds an advantage across more performance dimensions, but the Klipsch Reference Premiere RP-6000F II-EBONY may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the Wet Sounds 867V8PROB is the stronger choice — it leads in 4 of 5 scored dimensions. The Klipsch Reference Premiere RP-6000F II-EBONY makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Klipsch Reference Premiere RP-6000F II-EBONY
Wet Sounds 867V8PROB
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way HLCD with dual passive radiators |
| Sensitivity | 96dB | 92dB |
| Impedance | 8Ω | 4Ω |
| Freq Response Low | 38Hz | 20Hz |
| Freq Response High | 25000Hz | 20000Hz |
| Crossover | 1770Hz | — |
| Bi-Amp Capable | Yes | No |
| Rec. Power Min | 50W | 10W |
| Rec. Power Max | 125W | 200W |
| Mounting Type | tower | outdoor |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | Yes |
| UV Resistant | No | Yes |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Rec. Power Min: Klipsch Reference Premiere RP-6000F II-EBONY at 50W vs Wet Sounds 867V8PROB at 10W
- Impedance: Klipsch Reference Premiere RP-6000F II-EBONY at 8Ω vs Wet Sounds 867V8PROB at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response Low: Klipsch Reference Premiere RP-6000F II-EBONY at 38Hz vs Wet Sounds 867V8PROB at 20Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Rec. Power Max: Klipsch Reference Premiere RP-6000F II-EBONY at 125W vs Wet Sounds 867V8PROB at 200W
- Freq Response High: Klipsch Reference Premiere RP-6000F II-EBONY at 25000Hz vs Wet Sounds 867V8PROB at 20000Hz
Which Should You Choose?
Choose Klipsch Reference Premiere RP-6000F II-EBONY if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
Choose Wet Sounds 867V8PROB if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Klipsch Reference Premiere RP-6000F II-EBONY and Wet Sounds 867V8PROB compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
Klipsch Reference Premiere RP-6000F II-EBONY
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
Wet Sounds 867V8PROB
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
Klipsch Reference Premiere RP-6000F II-EBONY
vs Bowers & Wilkins 603 S3-OAK
Wet Sounds 867V8PROB
vs Bowers & Wilkins 603 S3-OAK
Klipsch Reference Premiere RP-6000F II-EBONY
vs Focal THEVA CENTER-LIGHT-WOOD
Wet Sounds 867V8PROB
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.