KEF 991160CRDS vs Perlisten A3T
Prices updated hourly. Check retailer for current availability.
Choosing between the KEF 991160CRDS and Perlisten A3T? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The KEF 991160CRDS scores higher in form factor, room fit. The Perlisten A3T leads in audio quality, volume/SPL. They score similarly in value.
For speaker performance, the KEF 991160CRDS is more sensitive at 91 dB vs 87.7 dB, and impedances of 8Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
These two are closely matched — your decision comes down to your specific room setup and speaker pairing and budget.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way dual-voice-coil stereo | 2-way bass reflex |
| Sensitivity | 91dB | 87.7dB |
| Impedance | 8Ω | 4Ω |
| Freq Response Low | 50Hz | 31Hz |
| Freq Response High | 20000Hz | 27000Hz |
| Crossover | 3200Hz | — |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 10W | 50W |
| Rec. Power Max | 80W | 300W |
| Mounting Type | in-ceiling | tower |
| Mounting Depth | 3.36" | — |
| Cutout Diameter | 7.71" | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | Yes | No |
| Magnetic Grille | Yes | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Rec. Power Min: KEF 991160CRDS at 10W vs Perlisten A3T at 50W
- Rec. Power Max: KEF 991160CRDS at 80W vs Perlisten A3T at 300W
- Impedance: KEF 991160CRDS at 8Ω vs Perlisten A3T at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response Low: KEF 991160CRDS at 50Hz vs Perlisten A3T at 31Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Freq Response High: KEF 991160CRDS at 20000Hz vs Perlisten A3T at 27000Hz
Which Should You Choose?
Choose KEF 991160CRDS if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
Choose Perlisten A3T if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how KEF 991160CRDS and Perlisten A3T compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
KEF 991160CRDS
vs Bowers & Wilkins 603 S3-OAK
Perlisten A3T
vs Bowers & Wilkins 603 S3-OAK
KEF 991160CRDS
vs Bowers & Wilkins HTM71 S3-MOCHA
Perlisten A3T
vs Bowers & Wilkins HTM71 S3-MOCHA
KEF 991160CRDS
vs Focal THEVA CENTER-LIGHT-WOOD
Perlisten A3T
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more