JBL Stage 280F-LATTE vs Sonus faber Lumina III-WALNUT
Prices updated hourly. Check retailer for current availability.
Choosing between the JBL Stage 280F-LATTE and Sonus faber Lumina III-WALNUT? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The JBL Stage 280F-LATTE scores higher in value, audio quality, volume/SPL. The Sonus faber Lumina III-WALNUT leads in form factor, room fit.
For speaker performance, the JBL Stage 280F-LATTE is more sensitive at 91 dB vs 89 dB, and impedances of 6Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
For most home theaters, the JBL Stage 280F-LATTE is the stronger choice — it leads in 3 of 5 scored dimensions. The Sonus faber Lumina III-WALNUT makes more sense if you prioritize the 2 dimensions where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
JBL Stage 280F-LATTE
Sonus faber Lumina III-WALNUT
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2.5-way |
| Sensitivity | 91dB | 89dB |
| Impedance | 6Ω | 4Ω |
| Freq Response Low | 33Hz | 40Hz |
| Freq Response High | 25000Hz | 24000Hz |
| Crossover | 1100Hz | 3500Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 20W | 50W |
| Rec. Power Max | 225W | 150W |
| Mounting Type | tower | tower |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Crossover: JBL Stage 280F-LATTE at 1100Hz vs Sonus faber Lumina III-WALNUT at 3500Hz
- Rec. Power Min: JBL Stage 280F-LATTE at 20W vs Sonus faber Lumina III-WALNUT at 50W
- Impedance: JBL Stage 280F-LATTE at 6Ω vs Sonus faber Lumina III-WALNUT at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Rec. Power Max: JBL Stage 280F-LATTE at 225W vs Sonus faber Lumina III-WALNUT at 150W
- Driver Config: JBL Stage 280F-LATTE at 2-way vs Sonus faber Lumina III-WALNUT at 2.5-way. 3-way speakers use dedicated drivers for bass, midrange, and treble, reducing crossover interference. Coaxial designs (KEF Uni-Q) mount the tweeter inside the woofer for better time-alignment.
Which Should You Choose?
Choose JBL Stage 280F-LATTE if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how JBL Stage 280F-LATTE and Sonus faber Lumina III-WALNUT compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
JBL Stage 280F-LATTE
vs Focal KANTA CENTER-HIGH-GLOSS-WALNUT-IVORY
Sonus faber Lumina III-WALNUT
vs Focal KANTA CENTER-HIGH-GLOSS-WALNUT-IVORY
JBL Stage 280F-LATTE
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
Sonus faber Lumina III-WALNUT
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
JBL Stage 280F-LATTE
vs Bowers & Wilkins 603 S3-OAK
Sonus faber Lumina III-WALNUT
vs Bowers & Wilkins 603 S3-OAK
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.