Focal ON-WALL-302 vs Klipsch CMS-4
Prices updated hourly. Check retailer for current availability.
Choosing between the Focal ON-WALL-302 and Klipsch CMS-4? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Focal ON-WALL-302 scores higher in value. The Klipsch CMS-4 leads in audio quality, volume/SPL, form factor, room fit.
For speaker performance, the Klipsch CMS-4 is more sensitive at 92 dB vs 91 dB, and impedances of 8Ω vs 6Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The Klipsch CMS-4 holds an advantage across more performance dimensions, but the Focal ON-WALL-302 may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the Klipsch CMS-4 is the stronger choice — it leads in 4 of 5 scored dimensions. The Focal ON-WALL-302 makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Focal ON-WALL-302
Klipsch CMS-4
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | — |
| Sensitivity | 91dB | 92dB |
| Impedance | 8Ω | 6Ω |
| Freq Response Low | 50Hz | 51Hz |
| Freq Response High | 28000Hz | 135000Hz |
| Crossover | — | 4900Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 40W | — |
| Rec. Power Max | 180W | — |
| Mounting Type | tower | tower |
| Mounting Depth | — | 11.25" |
| Cutout Diameter | — | 14.12" |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | Yes | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Freq Response High: Focal ON-WALL-302 at 28000Hz vs Klipsch CMS-4 at 135000Hz
- Impedance: Focal ON-WALL-302 at 8Ω vs Klipsch CMS-4 at 6Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response Low: Focal ON-WALL-302 at 50Hz vs Klipsch CMS-4 at 51Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Sensitivity: Focal ON-WALL-302 at 91dB vs Klipsch CMS-4 at 92dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
- Driver Config: Focal ON-WALL-302 at 2-way vs Klipsch CMS-4 at —. 3-way speakers use dedicated drivers for bass, midrange, and treble, reducing crossover interference. Coaxial designs (KEF Uni-Q) mount the tweeter inside the woofer for better time-alignment.
Which Should You Choose?
Choose Focal ON-WALL-302 if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
Choose Klipsch CMS-4 if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
See Where These Rank
Check our editorial rankings to see how Focal ON-WALL-302 and Klipsch CMS-4 compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.

