ELAC UFR52 vs MartinLogan ELECTROMOTION ESL C-SATIN-BLACK
Prices updated hourly. Check retailer for current availability.
Choosing between the ELAC UFR52 and MartinLogan ELECTROMOTION ESL C-SATIN-BLACK? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The ELAC UFR52 scores higher in value. The MartinLogan ELECTROMOTION ESL C-SATIN-BLACK leads in audio quality, volume/SPL, form factor, room fit.
For speaker performance, the MartinLogan ELECTROMOTION ESL C-SATIN-BLACK is more sensitive at 89 dB vs 86 dB, and impedances of 6Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The MartinLogan ELECTROMOTION ESL C-SATIN-BLACK holds an advantage across more performance dimensions, but the ELAC UFR52 may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the MartinLogan ELECTROMOTION ESL C-SATIN-BLACK is the stronger choice — it leads in 4 of 5 scored dimensions. The ELAC UFR52 makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
ELAC UFR52
MartinLogan ELECTROMOTION ESL C-SATIN-BLACK
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 3-way bass reflex | 3-way |
| Sensitivity | 86dB | 89dB |
| Impedance | 6Ω | 4Ω |
| Freq Response Low | 40Hz | 66Hz |
| Freq Response High | 35000Hz | 23000Hz |
| Crossover | 1800Hz | 3400Hz |
| Bi-Amp Capable | Yes | No |
| Rec. Power Min | — | 300W |
| Rec. Power Max | — | — |
| Mounting Type | tower | center |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Crossover: ELAC UFR52 at 1800Hz vs MartinLogan ELECTROMOTION ESL C-SATIN-BLACK at 3400Hz
- Freq Response Low: ELAC UFR52 at 40Hz vs MartinLogan ELECTROMOTION ESL C-SATIN-BLACK at 66Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Freq Response High: ELAC UFR52 at 35000Hz vs MartinLogan ELECTROMOTION ESL C-SATIN-BLACK at 23000Hz
- Impedance: ELAC UFR52 at 6Ω vs MartinLogan ELECTROMOTION ESL C-SATIN-BLACK at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Sensitivity: ELAC UFR52 at 86dB vs MartinLogan ELECTROMOTION ESL C-SATIN-BLACK at 89dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
Which Should You Choose?
Choose ELAC UFR52 if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
Choose MartinLogan ELECTROMOTION ESL C-SATIN-BLACK if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
See Where These Rank
Check our editorial rankings to see how ELAC UFR52 and MartinLogan ELECTROMOTION ESL C-SATIN-BLACK compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
ELAC UFR52
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
MartinLogan ELECTROMOTION ESL C-SATIN-BLACK
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
ELAC UFR52
vs Bowers & Wilkins 603 S3-OAK
MartinLogan ELECTROMOTION ESL C-SATIN-BLACK
vs Bowers & Wilkins 603 S3-OAK
ELAC UFR52
vs Focal THEVA CENTER-LIGHT-WOOD
MartinLogan ELECTROMOTION ESL C-SATIN-BLACK
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.