ELAC DCR52-WALNUT-BLACK vs MartinLogan MOTION 6I
Prices updated hourly. Check retailer for current availability.
Choosing between the ELAC DCR52-WALNUT-BLACK and MartinLogan MOTION 6I? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The MartinLogan MOTION 6I leads in value, audio quality, volume/SPL, form factor, room fit.
For speaker performance, the MartinLogan MOTION 6I is more sensitive at 89 dB vs 87 dB, and impedances of 8Ω vs 6Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The MartinLogan MOTION 6I holds an advantage across more performance dimensions, but the ELAC DCR52-WALNUT-BLACK may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the MartinLogan MOTION 6I is the stronger choice — it leads in 5 of 5 scored dimensions. The ELAC DCR52-WALNUT-BLACK makes more sense if budget is the primary constraint.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
ELAC DCR52-WALNUT-BLACK
MartinLogan MOTION 6I
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way bass reflex | 2-way |
| Sensitivity | 87dB | 89dB |
| Impedance | 8Ω | 6Ω |
| Freq Response Low | 55Hz | 120Hz |
| Freq Response High | 35000Hz | 23000Hz |
| Crossover | 2200Hz | 4000Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 120W | 130W |
| Rec. Power Max | — | — |
| Mounting Type | center | center |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Freq Response Low: ELAC DCR52-WALNUT-BLACK at 55Hz vs MartinLogan MOTION 6I at 120Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Crossover: ELAC DCR52-WALNUT-BLACK at 2200Hz vs MartinLogan MOTION 6I at 4000Hz
- Freq Response High: ELAC DCR52-WALNUT-BLACK at 35000Hz vs MartinLogan MOTION 6I at 23000Hz
- Impedance: ELAC DCR52-WALNUT-BLACK at 8Ω vs MartinLogan MOTION 6I at 6Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Rec. Power Min: ELAC DCR52-WALNUT-BLACK at 120W vs MartinLogan MOTION 6I at 130W
Which Should You Choose?
Choose ELAC DCR52-WALNUT-BLACK if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
Choose MartinLogan MOTION 6I if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
See Where These Rank
Check our editorial rankings to see how ELAC DCR52-WALNUT-BLACK and MartinLogan MOTION 6I compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
ELAC DCR52-WALNUT-BLACK
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
MartinLogan MOTION 6I
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
ELAC DCR52-WALNUT-BLACK
vs Bowers & Wilkins 603 S3-OAK
MartinLogan MOTION 6I
vs Bowers & Wilkins 603 S3-OAK
ELAC DCR52-WALNUT-BLACK
vs Focal THEVA CENTER-LIGHT-WOOD
MartinLogan MOTION 6I
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.