ELAC 970ICV61W vs KEF 991160TS
Prices updated hourly. Check retailer for current availability.
Choosing between the ELAC 970ICV61W and KEF 991160TS? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The ELAC 970ICV61W scores higher in value, audio quality, volume/SPL, room fit. The KEF 991160TS leads in form factor.
For speaker performance, the ELAC 970ICV61W is more sensitive at 90 dB vs 87 dB, and impedances of 6Ω vs 8Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The ELAC 970ICV61W holds an advantage across more performance dimensions, but the KEF 991160TS may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the ELAC 970ICV61W is the stronger choice — it leads in 4 of 5 scored dimensions. The KEF 991160TS makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
ELAC 970ICV61W
KEF 991160TS
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | — |
| Sensitivity | 90dB | 87dB |
| Impedance | 6Ω | 8Ω |
| Freq Response Low | 45Hz | 110Hz |
| Freq Response High | 20000Hz | 24Hz |
| Crossover | 3000Hz | 1700Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 30W | 10W |
| Rec. Power Max | 120W | 100W |
| Mounting Type | in-ceiling | in-ceiling |
| Mounting Depth | 4.37" | 16" |
| Cutout Diameter | 8.11" | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | 0.36" |
| Wall Thickness Max | — | 1.03" |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | Yes | No |
| Magnetic Grille | Yes | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Freq Response High: ELAC 970ICV61W at 20000Hz vs KEF 991160TS at 24Hz
- Mounting Depth: ELAC 970ICV61W at 4.37" vs KEF 991160TS at 16"
- Rec. Power Min: ELAC 970ICV61W at 30W vs KEF 991160TS at 10W
- Freq Response Low: ELAC 970ICV61W at 45Hz vs KEF 991160TS at 110Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Crossover: ELAC 970ICV61W at 3000Hz vs KEF 991160TS at 1700Hz
Which Should You Choose?
Choose ELAC 970ICV61W if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how ELAC 970ICV61W and KEF 991160TS compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
ELAC 970ICV61W
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
KEF 991160TS
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
ELAC 970ICV61W
vs Bowers & Wilkins 603 S3-OAK
KEF 991160TS
vs Bowers & Wilkins 603 S3-OAK
ELAC 970ICV61W
vs Focal THEVA CENTER-LIGHT-WOOD
KEF 991160TS
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.