DALI KUPID-BLACK-ASH vs Polk Audio 107ATR6W
Prices updated hourly. Check retailer for current availability.
Choosing between the DALI KUPID-BLACK-ASH and Polk Audio 107ATR6W? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The DALI KUPID-BLACK-ASH scores higher in form factor, room fit. The Polk Audio 107ATR6W leads in value, audio quality, volume/SPL.
For speaker performance, the Polk Audio 107ATR6W is more sensitive at 90 dB vs 83 dB, and impedances of 4Ω vs 8Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
For most home theaters, the Polk Audio 107ATR6W is the stronger choice — it leads in 3 of 5 scored dimensions. The DALI KUPID-BLACK-ASH makes more sense if you prioritize the 2 dimensions where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
DALI KUPID-BLACK-ASH
Polk Audio 107ATR6W
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way |
| Sensitivity | 83dB | 90dB |
| Impedance | 4Ω | 8Ω |
| Freq Response Low | 63Hz | 50Hz |
| Freq Response High | 25000Hz | 27000Hz |
| Crossover | 2100Hz | — |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 40W | 10W |
| Rec. Power Max | 120W | 100W |
| Mounting Type | bookshelf | outdoor |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | Yes |
| UV Resistant | No | Yes |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | Speed-Lock swivel |
| Bracket Included | No | Yes |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Rec. Power Min: DALI KUPID-BLACK-ASH at 40W vs Polk Audio 107ATR6W at 10W
- Impedance: DALI KUPID-BLACK-ASH at 4Ω vs Polk Audio 107ATR6W at 8Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response Low: DALI KUPID-BLACK-ASH at 63Hz vs Polk Audio 107ATR6W at 50Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Rec. Power Max: DALI KUPID-BLACK-ASH at 120W vs Polk Audio 107ATR6W at 100W
- Sensitivity: DALI KUPID-BLACK-ASH at 83dB vs Polk Audio 107ATR6W at 90dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
Which Should You Choose?
Choose Polk Audio 107ATR6W if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how DALI KUPID-BLACK-ASH and Polk Audio 107ATR6W compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
DALI KUPID-BLACK-ASH
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
Polk Audio 107ATR6W
vs Focal Aria Evo X No.2-BLACK HIGH GLOSS
DALI KUPID-BLACK-ASH
vs Bowers & Wilkins 603 S3-OAK
Polk Audio 107ATR6W
vs Bowers & Wilkins 603 S3-OAK
DALI KUPID-BLACK-ASH
vs Focal THEVA CENTER-LIGHT-WOOD
Polk Audio 107ATR6W
vs Focal THEVA CENTER-LIGHT-WOOD
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.