DALI 411H80 vs Klipsch RB-35
Prices updated hourly. Check retailer for current availability.
Choosing between the DALI 411H80 and Klipsch RB-35? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Klipsch RB-35 leads in value, audio quality, volume/SPL, form factor, room fit.
For speaker performance, the Klipsch RB-35 is more sensitive at 96 dB vs 90 dB, and impedances of 6Ω vs 8Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
The Klipsch RB-35 holds an advantage across more performance dimensions, but the DALI 411H80 may still be the better pick depending on which specs matter most to your setup. See the detailed comparison table below for the full breakdown.
For most home theaters, the Klipsch RB-35 is the stronger choice — it leads in 5 of 5 scored dimensions. The DALI 411H80 makes more sense if budget is the primary constraint.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
DALI 411H80
Klipsch RB-35
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way |
| Sensitivity | 90dB | 96dB |
| Impedance | 6Ω | 8Ω |
| Freq Response Low | 46Hz | 45Hz |
| Freq Response High | 25000Hz | 20000Hz |
| Crossover | 2350Hz | 2350Hz |
| Bi-Amp Capable | No | Yes |
| Rec. Power Min | 30W | — |
| Rec. Power Max | 200W | — |
| Mounting Type | in-wall | bookshelf |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Impedance: DALI 411H80 at 6Ω vs Klipsch RB-35 at 8Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response High: DALI 411H80 at 25000Hz vs Klipsch RB-35 at 20000Hz
- Sensitivity: DALI 411H80 at 90dB vs Klipsch RB-35 at 96dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
- Freq Response Low: DALI 411H80 at 46Hz vs Klipsch RB-35 at 45Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Bi-Amp Capable: DALI 411H80 at No vs Klipsch RB-35 at Yes
Which Should You Choose?
Choose Klipsch RB-35 if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how DALI 411H80 and Klipsch RB-35 compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.

