Bowers & Wilkins 749CCM664S vs Paradigm 819RM60SMG
Prices updated hourly. Check retailer for current availability.
Choosing between the Bowers & Wilkins 749CCM664S and Paradigm 819RM60SMG? Both compete in the Speaker (L/R) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Bowers & Wilkins 749CCM664S scores higher in form factor, room fit. The Paradigm 819RM60SMG leads in audio quality, volume/SPL. They score similarly in value.
For speaker performance, the Paradigm 819RM60SMG is more sensitive at 89 dB vs 82 dB, and impedances of 8Ω vs 4Ω. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (L/R) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
These two are closely matched — your decision comes down to your specific room setup and speaker pairing and budget.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way dual-channel | 2-way sealed |
| Sensitivity | 82dB | 89dB |
| Impedance | 8Ω | 4Ω |
| Freq Response Low | 48Hz | 66Hz |
| Freq Response High | 30000Hz | 20000Hz |
| Crossover | — | 3000Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 25W | 15W |
| Rec. Power Max | 80W | 100W |
| Mounting Type | in-ceiling | outdoor |
| Mounting Depth | 5.2" | — |
| Cutout Diameter | 8" | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | 0.25" | — |
| Wall Thickness Max | 1" | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | Yes | No |
| Magnetic Grille | Yes | No |
| Grille Shape | — | — |
| Connector Type | spring clips | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Impedance: Bowers & Wilkins 749CCM664S at 8Ω vs Paradigm 819RM60SMG at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Rec. Power Min: Bowers & Wilkins 749CCM664S at 25W vs Paradigm 819RM60SMG at 15W
- Freq Response High: Bowers & Wilkins 749CCM664S at 30000Hz vs Paradigm 819RM60SMG at 20000Hz
- Freq Response Low: Bowers & Wilkins 749CCM664S at 48Hz vs Paradigm 819RM60SMG at 66Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Rec. Power Max: Bowers & Wilkins 749CCM664S at 80W vs Paradigm 819RM60SMG at 100W
Which Should You Choose?
Choose Bowers & Wilkins 749CCM664S if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
Choose Paradigm 819RM60SMG if you want:
- + better sensitivity — higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks
See Where These Rank
Check our editorial rankings to see how Bowers & Wilkins 749CCM664S and Paradigm 819RM60SMG compare to the rest of the field.
Best Speaker (L/R) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more

