Klipsch FIVES-II vs OSD Audio T55E
Prices updated hourly. Check retailer for current availability.
Choosing between the Klipsch FIVES-II and OSD Audio T55E? Both compete in the Speaker (Height/Atmos) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Klipsch FIVES-II scores higher in audio quality, volume/SPL. The OSD Audio T55E leads in value, form factor, room fit.
These two Speaker (Height/Atmos) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
For most home theaters, the OSD Audio T55E is the stronger choice — it leads in 3 of 5 scored dimensions. The Klipsch FIVES-II makes more sense if you prioritize the 2 dimensions where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Klipsch FIVES-II
OSD Audio T55E
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 2-way | 2-way |
| Sensitivity | — | 87dB |
| Impedance | — | 4Ω |
| Freq Response Low | 50Hz | 100Hz |
| Freq Response High | 25000Hz | 20000Hz |
| Crossover | — | — |
| Bi-Amp Capable | No | No |
| Rec. Power Min | — | 25W |
| Rec. Power Max | — | 100W |
| Mounting Type | height | on-wall |
| Atmos Module | No | No |
| Coaxial | No | No |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Freq Response Low: Klipsch FIVES-II at 50Hz vs OSD Audio T55E at 100Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
- Freq Response High: Klipsch FIVES-II at 25000Hz vs OSD Audio T55E at 20000Hz
- Sensitivity: Klipsch FIVES-II at — vs OSD Audio T55E at 87dB. Higher sensitivity means your receiver works less hard, leaving more headroom for dynamic peaks in movie soundtracks. A speaker rated 3 dB higher in sensitivity needs half the amplifier power to reach the same volume.
- Impedance: Klipsch FIVES-II at — vs OSD Audio T55E at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Rec. Power Min: Klipsch FIVES-II at — vs OSD Audio T55E at 25W
Which Should You Choose?
Choose Klipsch FIVES-II if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Klipsch FIVES-II and OSD Audio T55E compare to the rest of the field.
Best Speaker (Height/Atmos) RankingsSpecifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.