Revel C426BE vs Sonus Faber VOX
Prices updated hourly. Check retailer for current availability.
Choosing between the Revel C426BE and Sonus Faber VOX? Both compete in the Speaker (Center) segment. Here’s how they compare across the specs that matter most for your home theater.
Pricing for both models is currently unavailable. Check the retailer links below for current deals.
Looking at overall performance dimensions: The Revel C426BE scores higher in value, form factor. The Sonus Faber VOX leads in room fit. They score similarly in audio quality, volume/SPL.
For speaker performance, impedances of 8Ω vs 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
These two Speaker (Center) options trade wins across different dimensions. The right choice depends on which specs matter most for your room and listening preferences — review the detailed table below to decide.
For most home theaters, the Revel C426BE is the stronger choice — it leads in 2 of 5 scored dimensions. The Sonus Faber VOX makes more sense if you prioritize the 1 dimension where it leads.
Performance Overview
Scores based on specs and category benchmarks (0–100 scale)
Revel C426BE
Sonus Faber VOX
Detailed Specifications
| Specification | ||
|---|---|---|
| Price | N/A | N/A |
| Driver Config | 3-way | 3-way |
| Sensitivity | 90dB | 90dB |
| Impedance | 8Ω | 4Ω |
| Freq Response Low | 38Hz | 40Hz |
| Freq Response High | 40000Hz | 35000Hz |
| Crossover | 210Hz | 2100Hz |
| Bi-Amp Capable | No | No |
| Rec. Power Min | 50W | 50W |
| Rec. Power Max | 300W | 300W |
| Mounting Type | center | center |
| Mounting Depth | — | — |
| Cutout Diameter | — | — |
| Cutout Width | — | — |
| Cutout Height | — | — |
| Wall Thickness Min | — | — |
| Wall Thickness Max | — | — |
| Back Box Included | No | No |
| Back Box Required | No | No |
| Mounting Mechanism | — | — |
| Installation Type | — | — |
| Stud Spacing | — | — |
| Paintable Grille | No | No |
| Magnetic Grille | No | No |
| Grille Shape | — | — |
| Connector Type | — | — |
| Wire Gauge Max | — | — |
| Angle Adjustable | No | No |
| Pivot Angle | — | — |
| Treble Attenuation Switch | No | No |
| LCR Capable | No | No |
| Coaxial | No | No |
| IP Rating | — | — |
| Moisture Resistant | No | No |
| UV Resistant | No | No |
| Salt Spray Rated | No | No |
| Enclosure Material | — | — |
| Grille Material | — | — |
| Bracket Type | — | — |
| Bracket Included | No | No |
| Dual Voice Coil (SDI) | No | No |
Key Differences
- Crossover: Revel C426BE at 210Hz vs Sonus Faber VOX at 2100Hz
- Impedance: Revel C426BE at 8Ω vs Sonus Faber VOX at 4Ω. Lower impedance draws more current from your receiver. A 4-ohm speaker needs a receiver rated for that load, or you risk thermal shutdown during loud passages.
- Freq Response High: Revel C426BE at 40000Hz vs Sonus Faber VOX at 35000Hz
- Freq Response Low: Revel C426BE at 38Hz vs Sonus Faber VOX at 40Hz. Determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support.
Which Should You Choose?
Choose Revel C426BE if you want:
- + better freq response low — determines how much bass a speaker handles on its own versus relying on a subwoofer for low-end support
See Where These Rank
Check our editorial rankings to see how Revel C426BE and Sonus Faber VOX compare to the rest of the field.
Best Speaker (Center) RankingsRelated Calculators
Specifications sourced from manufacturer datasheets and verified against retailer listings. Prices updated hourly from authorized retailers. Scoring uses our open methodology — products are never ranked, promoted, or suppressed based on affiliate commission rates.
Related Comparisons
CinemaConfig may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. See our affiliate disclosure.